|
|
|
Increase efficiency and improve your productivity. No need to dig a hole under your pipe or roll it over a cable or chain for lifting. This lifter is designed to handle up to 8' long sections of bell and spigot precast concrete pipe in capacities up to 30,000 pounds.
|
|
|
|
These large mouth clamps are designed to handles 4" - 6" thick sections without damage to the concrete seat. Chain legs allow for quick positioning to balance the load. Two or three leg models available for up to 15,000 pounds. Works on a variety of shapes.
|
|
|
|
Use the magnet to easily lift manhole covers from frames for access. Simply roll the lifter over the cover, lower, engage the magnet and lift. You can now easily roll the cover out of the way to allow for maintenance access.
|
|
|
|
SAVE YOUR BACK!
This grab easily attaches to cast manhole sleeves for quick installation. Two leg model works great for standard rounds, or get the three leg model for different shapes and sizes.
|
|
|
|
Multiple Pipe Lifters can help you move your concrete pipe up to 3 times faster than with a standard fork truck.
|
|
|
|
This Quick Disconnect Pipe Lifting slings allows you to make lifts one after the other, without removing the slings from the hook to disconnect the rigging.
|
|
|
|
Made for specific sizes of Cast Iron or Steel Pipe, these grabs easily attach to the load and the built-in outriggers help to stabalize the load during lift.
|
|
|
|
Simply insert the Pipe Pick™ in to the lifting hole in the pipe-tilt-to engage the beveled edge-and lift up! You can now lift and set the pipe. Once the pipe is set, lower the Pipe Pick™; the counterweight lift arm automatically falls straight and the Pipe Pick™ can be removed from the pipe.
|
|
|
|
Available in fixed or adjustable diameter ranges, these versatile tongs with lift a wide range of round pieces. Capacities range from 500 to 2,000 pounds.
|
|
|
|
Simply hook the hardware back into the body of the sling to choke the pipe and lift. This Quick Choke™ Pipe Lifting slings allows you quickly and easily handle pipes.
|
|
|
|
Efficiently handle concrete water and sewer pipes with this pipe carrier system. Use the carrier with the custom designed corresponding lifting sling for safe and efficient handling of pipes up to 18 tons.
|
|
|
|
This sling is custom designed to be used with our Tea Cup Pipe Carriers.
|
|
|
|
These Nylon Choker slings are an economical way to handle pipe. Slide the sling under the pipe, insert the triangle through the choker, attach to your hook and lift.
|
|
|
|
These Wire Rope Choker slings are an economical way to handle pipe. Attach one eye to your hook, slide the sling under the pipe, insert the eye in the choker hook, and lift. The sliding choker hook can then be easily disconnected after the load is set with out the need to remove the other eye from
|
|
|
