|
|
|
Heavy duty beam grabs are designed to lift 'I' beams from 5 to 35 tons. Base of each unit is designed with cut outs to accept studs welded to the beam surface.
|
|
|
|
Heavy Duty manual grider clamps can be used on structural steel to install, lift, or hang items. Three different capacities available from 15 to 25 ton.
|
|
|
|
Screw-pin adjusting beam flange clamp quickly attaches to structural beams for lifting, positioning, or suspending. Three different capacities available from 1 to 5 ton.
|
|
|
|
Economy beam clamp can be used to lift and / or position structural beams. Handles flange ranges from 4" - 6".
|
|
|
|
Scissor-action tongs use the weight of the load to create the gripping force. Three different sizes available from 1 to 3 tons.
|
|
|
|
Designed to handle standard size rails in 1 or 2 ton capacities.
|
|
|
|
For lifting heavy slabs for concrete, stone or highly polished metal sheets that must be protected from scratching or marring. Urethane gripping pads are standard. Size ranges from 6" to 22" wide loads.
|
|
|
